Other Settings Tab: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
[[File:Other Settings.png]] | [[File:Other Settings.png]] | ||
== Prompt Tone == | |||
====== Profiles ====== | ====== Profiles ====== | ||
| Line 49: | Line 49: | ||
* 1 to 5: Select the sound that is made when roaming has selected a repeater channel. | * 1 to 5: Select the sound that is made when roaming has selected a repeater channel. | ||
== LED Indicators == | |||
====== All Indicators ====== | ====== All Indicators ====== | ||
| Line 75: | Line 76: | ||
* Not Used With This Radio | * Not Used With This Radio | ||
== Mic Gain == | |||
====== Mic Gain 1 (K1 2-Pin connector on side of the radio, Mic Gain 2 must be also enabled to take effect) ====== | ====== Mic Gain 1 (K1 2-Pin connector on side of the radio, Mic Gain 2 must be also enabled to take effect) ====== | ||
| Line 95: | Line 97: | ||
* Gain value setting between 0dB to 43dB. | * Gain value setting between 0dB to 43dB. | ||
== Quick Messages == | |||
You can define up to 100 messages that can be selected for sending from within the radio menu 'Message > CommMsg' | You can define up to 100 messages that can be selected for sending from within the radio menu 'Message > CommMsg' | ||
You can also add, edit and delete these messages on the radio. | You can also add, edit and delete these messages on the radio. | ||
Revision as of 09:39, 12 March 2022
The Other Settings Tab is where you would set parameters such as the audio prompt tones, LED indicators, Microphone Gain as well as adding/removing quick messages.
Prompt Tone
Profiles
- Standard: All prompt tones can be enabled, Set by their individual parameters.
- Silent: All prompt tones are disabled.
Volume
- Keytone Volume: Set between 1 and 13.
Keytone
- Off: Keytone is disabled. No sound is made when pressing buttons or turning the rotary switch.
- On: Keytone is enabled. A sound is made when pressing buttons or turning the rotary switch. Set by Volume (above)
Power On Tone
- Off: No sound is made when turning the radio on.
- On: A sound is made when turning the radio on.
SMS Prompt
- Off: No sound is made when receiving a message.
- 1 to 5: Select the sound that is made when receiving a message.
Private Call Tone and Group Call Tone
- Off: No sound is made when receiving a Private Call or Group Call.
- 1 to 5: Select the sound that is made when receiving a Private Call or Group Call.
Call Hangup Tone
- Off: No sound is made after the defined Private or Group 'Hang Time' in the DMR Settings Tab
- On: A sound is made after the defined Private or Group 'Hang Time' in the DMR Settings Tab
Roaming Restart Tone
- Off: No sound is made when roaming is restarted.
- 1 to 5: Select the sound that is made when roaming is restarted.
Repeater Selected Tone
- Off: No sound is made when roaming has selected a repeater channel.
- 1 to 5: Select the sound that is made when roaming has selected a repeater channel.
LED Indicators
All Indicators
- Off: Disable all LED Indicators on the radio.
- On: Enable all LED Indicators on the radio, Individual settings below.
TX Indicator
- Off: LED Indicator is disabled when the radio is transmitting.
- On: LED Indicator is enabled when the radio is transmitting.
RX Indicator
- Off: LED Indicator is disabled when the radio is receiving.
- On: LED Indicator is enabled when the radio is receiving.
Scanning Indicator
- Off: LED Indicator is disabled when the radio is scanning.
- On: LED Indicator is enabled when the radio is scanning.
Low Battery Indicator
- Not Used With This Radio
Mic Gain
Mic Gain 1 (K1 2-Pin connector on side of the radio, Mic Gain 2 must be also enabled to take effect)
- Off: Mic gain is disabled.
- On: Mic gain is enabled.
Mic Gain 1 Level
- Gain value setting: 0dB, 4dB, 8dB,12dB, 16dB, 20dB
Mic Gain 2 (RJ45 connector on front of the radio)
- Off: Mic gain is disabled.
- On: Mic gain is enabled.
Mic Gain 2 Level
- Gain value setting between 0dB to 43dB.
Quick Messages
You can define up to 100 messages that can be selected for sending from within the radio menu 'Message > CommMsg'
You can also add, edit and delete these messages on the radio.