Other Settings Tab

The Other Settings Tab is where you would set parameters such as the audio prompt tones, LED indicators, Microphone Gain as well as adding/removing quick messages.

Prompt Tone

Profiles

• Standard: All prompt tones can be enabled, Set by their individual parameters.
• Silent: All prompt tones are disabled.

Volume

• Keytone Volume: Set between 1 and 13.

Keytone

• Off: Keytone is disabled. No sound is made when pressing buttons or turning the rotary switch.
• On: Keytone is enabled. A sound is made when pressing buttons or turning the rotary switch. Set by Volume (above)

Power On Tone

• Off: No sound is made when turning the radio on.
• On: A sound is made when turning the radio on.

SMS Prompt

• Off: No sound is made when receiving a message.

• 1 to 5: Select the sound that is made when receiving a message.

Private Call Tone and Group Call Tone

• Off: No sound is made when receiving a Private Call or Group Call.
• 1 to 5: Select the sound that is made when receiving a Private Call or Group Call.

Call Hangup Tone

• Off: No sound is made after the defined Private or Group 'Hang Time' in the DMR Settings Tab
• On: A sound is made after the defined Private or Group 'Hang Time' in the DMR Settings Tab

Roaming Restart Tone

• Off: No sound is made when roaming is restarted.
• 1 to 5: Select the sound that is made when roaming is restarted.

Repeater Selected Tone

• Off: No sound is made when roaming has selected a repeater channel.
• 1 to 5: Select the sound that is made when roaming has selected a repeater channel.

All Indicators

• Off: Disable all LED Indicators on the radio.
• On: Enable all LED Indicators on the radio, Individual settings below.

TX Indicator

• Off: LED Indicator is disabled when the radio is transmitting.
• On: LED Indicator is enabled when the radio is transmitting.

RX Indicator

• Off: LED Indicator is disabled when the radio is receiving.
• On: LED Indicator is enabled when the radio is receiving.

Scanning Indicator

• Off: LED Indicator is disabled when the radio is scanning.
• On: LED Indicator is enabled when the radio is scanning.

Low Battery Indicator

• Not Used With This Radio

Mic Gain 1 (K1 2-Pin connector on side of the radio, Mic Gain 2 must be also enabled to take effect)

• Off: Mic gain is disabled.
• On: Mic gain is enabled.

Mic Gain 1 Level

• Gain value setting: 0dB, 4dB, 8dB,12dB, 16dB, 20dB

Mic Gain 2 (RJ45 connector on front of the radio)

• Off: Mic gain is disabled.
• On: Mic gain is enabled.

Mic Gain 2 Level

• Gain value setting between 0dB to 43dB.

Quick Messages

You can define up to 100 messages that can be selected for sending from within the radio menu 'Message > CommMsg'

You can also add, edit and delete these messages on the radio.