Other Settings Tab: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
* Silent: All prompt tones are disabled. | * Silent: All prompt tones are disabled. | ||
==== Volume ==== | ====== Volume ====== | ||
* Keytone Volume: Set between 1 and 13. | * Keytone Volume: Set between 1 and 13. | ||
==== Keytone ==== | ====== Keytone ====== | ||
* Off: Keytone is disabled. No sound is made when pressing buttons or turning the rotary switch. | * Off: Keytone is disabled. No sound is made when pressing buttons or turning the rotary switch. | ||
* On: Keytone is enabled. A sound is made when pressing buttons or turning the rotary switch. Set by Volume (above) | * On: Keytone is enabled. A sound is made when pressing buttons or turning the rotary switch. Set by Volume (above) | ||
==== Power On Tone ==== | ====== Power On Tone ====== | ||
* Off: No sound is made when turning the radio on. | * Off: No sound is made when turning the radio on. | ||
* On: A sound is made when turning the radio on. | * On: A sound is made when turning the radio on. | ||
==== SMS Prompt ==== | ====== SMS Prompt ====== | ||
* Off: No sound is made when receiving a message. | * Off: No sound is made when receiving a message. | ||
| Line 29: | Line 29: | ||
* 1 to 5: Select the sound that is made when receiving a message. | * 1 to 5: Select the sound that is made when receiving a message. | ||
==== Private Call Tone and Group Call Tone ==== | ====== Private Call Tone and Group Call Tone ====== | ||
* Off: No sound is made when receiving a Private Call or Group Call. | * Off: No sound is made when receiving a Private Call or Group Call. | ||
* 1 to 5: Select the sound that is made when receiving a Private Call or Group Call. | * 1 to 5: Select the sound that is made when receiving a Private Call or Group Call. | ||
==== Call Hangup Tone ==== | ====== Call Hangup Tone ====== | ||
* Off: No sound is made after the defined Private or Group 'Hang Time' in the [[DMR Settings Tab|<u>DMR Settings Tab</u>]] | * Off: No sound is made after the defined Private or Group 'Hang Time' in the [[DMR Settings Tab|<u>DMR Settings Tab</u>]] | ||
* On: A sound is made after the defined Private or Group 'Hang Time' in the [[DMR Settings Tab|<u>DMR Settings Tab</u>]] | * On: A sound is made after the defined Private or Group 'Hang Time' in the [[DMR Settings Tab|<u>DMR Settings Tab</u>]] | ||
==== Roaming Restart Tone ==== | ====== Roaming Restart Tone ====== | ||
* Off: No sound is made when roaming is restarted. | * Off: No sound is made when roaming is restarted. | ||
* 1 to 5: Select the sound that is made when roaming is restarted. | * 1 to 5: Select the sound that is made when roaming is restarted. | ||
==== Repeater Selected Tone ==== | ====== Repeater Selected Tone ====== | ||
* Off: No sound is made when roaming has selected a repeater channel. | * Off: No sound is made when roaming has selected a repeater channel. | ||
| Line 51: | Line 51: | ||
==== LED Indicators ==== | ==== LED Indicators ==== | ||
==== All Indicators ==== | ====== All Indicators ====== | ||
* Off: Disable all LED Indicators on the radio. | * Off: Disable all LED Indicators on the radio. | ||
* On: Enable all LED Indicators on the radio, Individual settings below. | * On: Enable all LED Indicators on the radio, Individual settings below. | ||
==== TX Indicator ==== | ====== TX Indicator ====== | ||
* Off: LED Indicator is disabled when the radio is transmitting. | * Off: LED Indicator is disabled when the radio is transmitting. | ||
* On: LED Indicator is enabled when the radio is transmitting. | * On: LED Indicator is enabled when the radio is transmitting. | ||
==== RX Indicator ==== | ====== RX Indicator ====== | ||
* Off: LED Indicator is disabled when the radio is receiving. | * Off: LED Indicator is disabled when the radio is receiving. | ||
* On: LED Indicator is enabled when the radio is receiving. | * On: LED Indicator is enabled when the radio is receiving. | ||
==== Scanning Indicator ==== | ====== Scanning Indicator ====== | ||
* Off: LED Indicator is disabled when the radio is scanning. | * Off: LED Indicator is disabled when the radio is scanning. | ||
* On: LED Indicator is enabled when the radio is scanning. | * On: LED Indicator is enabled when the radio is scanning. | ||
==== Low Battery Indicator ==== | ====== Low Battery Indicator ====== | ||
* Not Used With This Radio | * Not Used With This Radio | ||
| Line 77: | Line 77: | ||
==== Mic Gain ==== | ==== Mic Gain ==== | ||
==== Mic Gain 1 (K1 2-Pin connector on side of the radio, Mic Gain 2 must be also enabled to take effect) ==== | ====== Mic Gain 1 (K1 2-Pin connector on side of the radio, Mic Gain 2 must be also enabled to take effect) ====== | ||
* Off: Mic gain is disabled. | * Off: Mic gain is disabled. | ||
* On: Mic gain is enabled. | * On: Mic gain is enabled. | ||
==== Mic Gain 1 Level ==== | ====== Mic Gain 1 Level ====== | ||
* Gain value setting: 0dB, 4dB, 8dB,12dB, 16dB, 20dB | * Gain value setting: 0dB, 4dB, 8dB,12dB, 16dB, 20dB | ||
==== Mic Gain 2 (RJ45 connector on front of the radio) ==== | ====== Mic Gain 2 (RJ45 connector on front of the radio) ====== | ||
* Off: Mic gain is disabled. | * Off: Mic gain is disabled. | ||
* On: Mic gain is enabled. | * On: Mic gain is enabled. | ||
==== Mic Gain 2 Level ==== | ====== Mic Gain 2 Level ====== | ||
* Gain value setting between 0dB to 43dB. | * Gain value setting between 0dB to 43dB. | ||
Revision as of 07:58, 12 March 2022
The Other Settings Tab is where you would set parameters such as the audio prompt tones, LED indicators, Microphone Gain as well as adding/removing quick messages.
Prompt Tone
Profiles
- Standard: All prompt tones can be enabled, Set by their individual parameters.
- Silent: All prompt tones are disabled.
Volume
- Keytone Volume: Set between 1 and 13.
Keytone
- Off: Keytone is disabled. No sound is made when pressing buttons or turning the rotary switch.
- On: Keytone is enabled. A sound is made when pressing buttons or turning the rotary switch. Set by Volume (above)
Power On Tone
- Off: No sound is made when turning the radio on.
- On: A sound is made when turning the radio on.
SMS Prompt
- Off: No sound is made when receiving a message.
- 1 to 5: Select the sound that is made when receiving a message.
Private Call Tone and Group Call Tone
- Off: No sound is made when receiving a Private Call or Group Call.
- 1 to 5: Select the sound that is made when receiving a Private Call or Group Call.
Call Hangup Tone
- Off: No sound is made after the defined Private or Group 'Hang Time' in the DMR Settings Tab
- On: A sound is made after the defined Private or Group 'Hang Time' in the DMR Settings Tab
Roaming Restart Tone
- Off: No sound is made when roaming is restarted.
- 1 to 5: Select the sound that is made when roaming is restarted.
Repeater Selected Tone
- Off: No sound is made when roaming has selected a repeater channel.
- 1 to 5: Select the sound that is made when roaming has selected a repeater channel.
LED Indicators
All Indicators
- Off: Disable all LED Indicators on the radio.
- On: Enable all LED Indicators on the radio, Individual settings below.
TX Indicator
- Off: LED Indicator is disabled when the radio is transmitting.
- On: LED Indicator is enabled when the radio is transmitting.
RX Indicator
- Off: LED Indicator is disabled when the radio is receiving.
- On: LED Indicator is enabled when the radio is receiving.
Scanning Indicator
- Off: LED Indicator is disabled when the radio is scanning.
- On: LED Indicator is enabled when the radio is scanning.
Low Battery Indicator
- Not Used With This Radio
Mic Gain
Mic Gain 1 (K1 2-Pin connector on side of the radio, Mic Gain 2 must be also enabled to take effect)
- Off: Mic gain is disabled.
- On: Mic gain is enabled.
Mic Gain 1 Level
- Gain value setting: 0dB, 4dB, 8dB,12dB, 16dB, 20dB
Mic Gain 2 (RJ45 connector on front of the radio)
- Off: Mic gain is disabled.
- On: Mic gain is enabled.
Mic Gain 2 Level
- Gain value setting between 0dB to 43dB.
Quick Messages
You can define up to 100 messages that can be selected for sending from within the radio menu 'Message > CommMsg'
You can also add, edit and delete these messages on the radio.