Other Settings Tab: Difference between revisions

From CPEditor Wiki
Jump to navigation Jump to search
No edit summary
(Marked this version for translation)
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
<languages />
<translate>
<!--T:1-->
The Other Settings Tab is where you would set parameters such as the audio prompt tones, LED indicators, Microphone Gain as well as adding/removing quick messages.
The Other Settings Tab is where you would set parameters such as the audio prompt tones, LED indicators, Microphone Gain as well as adding/removing quick messages.


<!--T:2-->
[[File:Other Settings.png]]
[[File:Other Settings.png]]


==== Language (Note that other languages available in the different firmwares are not yet supported) ====
== Prompt Tone == <!--T:3-->


* English
====== Profiles ====== <!--T:4-->
* Chinesed
* Standard: All prompt tones can be enabled, Set by their individual parameters.
* Silent: All prompt tones are disabled.


==== Backlight ====
====== Volume ====== <!--T:5-->


* On: Screen is always at the brightness level set within the radio menu - LocalSet > BackLight > Brightness.
<!--T:6-->
* Off: Screen is always at brightness level 0
* Keytone Volume: Set between 1 and 13.
* Auto: Screen will turn off after the delay time set within the radio menu - LocalSet > BackLight > DelayTime (10 to 60 seconds)
 
====== Keytone ====== <!--T:7-->
 
<!--T:8-->
* Off: Keytone is disabled. No sound is made when pressing buttons or turning the rotary switch.
* On: Keytone is enabled. A sound is made when pressing buttons or turning the rotary switch. Set by Volume (above)
 
====== Power On Tone ====== <!--T:9-->
 
<!--T:10-->
* Off: No sound is made when turning the radio on.
* On: A sound is made when turning the radio on.
 
====== SMS Prompt ====== <!--T:11-->
 
<!--T:12-->
* Off: No sound is made when receiving a message.
 
<!--T:13-->
* 1 to 5: Select the sound that is made when receiving a message.
 
====== Private Call Tone and Group Call Tone ====== <!--T:14-->
 
<!--T:15-->
* Off: No sound is made when receiving a Private Call or Group Call.
* 1 to 5: Select the sound that is made when receiving a Private Call or Group Call.
 
====== Call Hangup Tone ====== <!--T:16-->
 
<!--T:17-->
* Off: No sound is made after the defined Private or Group 'Hang Time' in the [[DMR Settings Tab|<u>DMR Settings Tab</u>]]
* On: A sound is made after the defined Private or Group 'Hang Time' in the [[DMR Settings Tab|<u>DMR Settings Tab</u>]]
 
====== Roaming Restart Tone ====== <!--T:18-->
 
<!--T:19-->
* Off: No sound is made when roaming is restarted.
* 1 to 5: Select the sound that is made when roaming is restarted.
 
====== Repeater Selected Tone ====== <!--T:20-->
 
<!--T:21-->
* Off: No sound is made when roaming has selected a repeater channel.
* 1 to 5: Select the sound that is made when roaming has selected a repeater channel.
 
 
== LED Indicators == <!--T:22-->
 
====== All Indicators ====== <!--T:23-->
 
<!--T:24-->
* Off: Disable all LED Indicators on the radio.
* On: Enable all LED Indicators on the radio, Individual settings below.
 
====== TX Indicator ====== <!--T:25-->
 
<!--T:26-->
* Off: LED Indicator is disabled when the radio is transmitting.
* On: LED Indicator is enabled when the radio is transmitting.
 
====== RX Indicator ====== <!--T:27-->
 
<!--T:28-->
* Off: LED Indicator is disabled when the radio is receiving.
* On: LED Indicator is enabled when the radio is receiving.
 
====== Scanning Indicator ====== <!--T:29-->
 
<!--T:30-->
* Off: LED Indicator is disabled when the radio is scanning.
* On: LED Indicator is enabled when the radio is scanning.
 
====== Low Battery Indicator ====== <!--T:31-->
 
<!--T:32-->
* Not Used With This Radio
 
 
== Mic Gain == <!--T:33-->
 
====== Mic Gain 1 (K1 2-Pin connector on side of the radio, Mic Gain 2 must be also enabled to take effect) ====== <!--T:34-->
 
<!--T:35-->
* Off: Mic gain is disabled.
* On: Mic gain is enabled.
 
====== Mic Gain 1 Level ====== <!--T:36-->
 
<!--T:37-->
* Gain value setting: 0dB, 4dB, 8dB,12dB, 16dB, 20dB
 
====== Mic Gain 2 (RJ45 connector on front of the radio) ====== <!--T:38-->
 
<!--T:39-->
* Off: Mic gain is disabled.
* On: Mic gain is enabled.
 
====== Mic Gain 2 Level ====== <!--T:40-->
 
<!--T:41-->
* Gain value setting between 0dB to 43dB.
 
 
== Quick Messages == <!--T:42-->
You can define up to 100 messages that can be selected for sending from within the radio menu 'Message > CommMsg'
 
<!--T:43-->
You can also add, edit and delete these messages on the radio.
</translate>

Latest revision as of 01:55, 28 March 2022

Other languages:
  • English

The Other Settings Tab is where you would set parameters such as the audio prompt tones, LED indicators, Microphone Gain as well as adding/removing quick messages.

Other Settings.png

Prompt Tone

Profiles
  • Standard: All prompt tones can be enabled, Set by their individual parameters.
  • Silent: All prompt tones are disabled.
Volume
  • Keytone Volume: Set between 1 and 13.
Keytone
  • Off: Keytone is disabled. No sound is made when pressing buttons or turning the rotary switch.
  • On: Keytone is enabled. A sound is made when pressing buttons or turning the rotary switch. Set by Volume (above)
Power On Tone
  • Off: No sound is made when turning the radio on.
  • On: A sound is made when turning the radio on.
SMS Prompt
  • Off: No sound is made when receiving a message.
  • 1 to 5: Select the sound that is made when receiving a message.
Private Call Tone and Group Call Tone
  • Off: No sound is made when receiving a Private Call or Group Call.
  • 1 to 5: Select the sound that is made when receiving a Private Call or Group Call.
Call Hangup Tone
  • Off: No sound is made after the defined Private or Group 'Hang Time' in the DMR Settings Tab
  • On: A sound is made after the defined Private or Group 'Hang Time' in the DMR Settings Tab
Roaming Restart Tone
  • Off: No sound is made when roaming is restarted.
  • 1 to 5: Select the sound that is made when roaming is restarted.
Repeater Selected Tone
  • Off: No sound is made when roaming has selected a repeater channel.
  • 1 to 5: Select the sound that is made when roaming has selected a repeater channel.


LED Indicators

All Indicators
  • Off: Disable all LED Indicators on the radio.
  • On: Enable all LED Indicators on the radio, Individual settings below.
TX Indicator
  • Off: LED Indicator is disabled when the radio is transmitting.
  • On: LED Indicator is enabled when the radio is transmitting.
RX Indicator
  • Off: LED Indicator is disabled when the radio is receiving.
  • On: LED Indicator is enabled when the radio is receiving.
Scanning Indicator
  • Off: LED Indicator is disabled when the radio is scanning.
  • On: LED Indicator is enabled when the radio is scanning.
Low Battery Indicator
  • Not Used With This Radio


Mic Gain

Mic Gain 1 (K1 2-Pin connector on side of the radio, Mic Gain 2 must be also enabled to take effect)
  • Off: Mic gain is disabled.
  • On: Mic gain is enabled.
Mic Gain 1 Level
  • Gain value setting: 0dB, 4dB, 8dB,12dB, 16dB, 20dB
Mic Gain 2 (RJ45 connector on front of the radio)
  • Off: Mic gain is disabled.
  • On: Mic gain is enabled.
Mic Gain 2 Level
  • Gain value setting between 0dB to 43dB.


Quick Messages

You can define up to 100 messages that can be selected for sending from within the radio menu 'Message > CommMsg'

You can also add, edit and delete these messages on the radio.

Retrieved from "https://www.cpeditor.co.uk/wiki/index.php?title=Other_Settings_Tab&oldid=440"