MM7DBT Codeplug Editor

Update Version 0.1.0617.3 - Date: 17/06/21

Changelog;

• Added Ham Groups upload. You can now upload your own Ham Groups, limit is set at 30,000

• Fixed a small issue regarding the timeslots and the "ON" setting. This is now better supported in the editor. You can set timeslots in the channel CSV to TS1, TS2 or ON and it will be set properly on import. There isn't any noticeable change to the codeplug or radio but it makes it easier to setup a hotspot using the CSV import. Just set the timeslots to ON.
  The main change with this is just 2 binary bits in the codeplug binary that tell the CPS that it's set to on. Before it would sometimes make the CPS show all channels as ON but it's not actually possible, only simplex channels can have the timeslot set to ON

• Added Timeout Timer to radio settings tab and the python script, didn't actually notice this was missing until I wanted to change it.. Now added

• Added Update Date is now updated to the current date/time when you upload a codeplug to the radio

You can now change the Radio Serial Number.. if you choose to do such thing.. To enable it, double-click on the "Serial Number" label and it will enable the text box.. Type your new 8 digit serial and press enter. When you upload to the radio it will write the new serial. The numbers are not unique between radios so if you have multiple radios it can be easier to set them all to a different number to easily tell them apart.

There may be some other minor fixes and tweaks here and the but the most important stuff is covered. Enjoy.

-Dave