Version 0.2.0907.2
Posted: Wed Sep 07, 2022 10:31 am
Update Version 0.2.0907.2 - Date: 07/09/22
Changelog;
Firmware update form has been updated to automatically detect the firmware version.
NOTE: It cannot detect the radio model you are using so be sure that you do not accidentally flash an incorrect firmware.
DR300UV - For: Kydera CDR-300UV, Maldol DB-25-D, Retevis RT73, Radioddity DB25-D etc..
DR880UV - For: Kydera DR-880UV, Radioddity GD-88
DR880UV update process requires both A and B firmware files to be selected before you are able to click the update button.
You will be prompted to connect the radio in DFU Mode and verify that IAP_A is selected.
Once the Band A firmware has been updated, it will prompt you to switch the radio to IAP_B and then automatically start updating the Band B firmware.
Once both firmware files have been uploaded, you can then safely turn off the radio.
Unlike the DR300 radios, it does not automatically turn off after updating the firmware.
--------------------------
Power On Logo has now also been enabled for the DR-880UV and GD-88, This is the same process as for the DR300 radios.
More information can be found on the wiki page: https://www.cpeditor.co.uk/wiki/Power_On_Logo
Changelog;
- Bugfix: Digital APRS Report Slot Now Set Correctly.
- GD-88: Added Ability To Update Firmware.
- GD-88: Added Ability To Change Power On Logo.
Firmware update form has been updated to automatically detect the firmware version.
NOTE: It cannot detect the radio model you are using so be sure that you do not accidentally flash an incorrect firmware.
DR300UV - For: Kydera CDR-300UV, Maldol DB-25-D, Retevis RT73, Radioddity DB25-D etc..
- dr300.PNG (9.88 KiB) Viewed 4498 times
DR880UV - For: Kydera DR-880UV, Radioddity GD-88
DR880UV update process requires both A and B firmware files to be selected before you are able to click the update button.
- dr880a.PNG (10.82 KiB) Viewed 4493 times
You will be prompted to connect the radio in DFU Mode and verify that IAP_A is selected.
- 880message.PNG (7.42 KiB) Viewed 4498 times
Once the Band A firmware has been updated, it will prompt you to switch the radio to IAP_B and then automatically start updating the Band B firmware.
- 880fwb.PNG (5.23 KiB) Viewed 4498 times
Once both firmware files have been uploaded, you can then safely turn off the radio.
Unlike the DR300 radios, it does not automatically turn off after updating the firmware.
--------------------------
Power On Logo has now also been enabled for the DR-880UV and GD-88, This is the same process as for the DR300 radios.
More information can be found on the wiki page: https://www.cpeditor.co.uk/wiki/Power_On_Logo