Help for analog channel

[CT2HKY]

If I'm use your Java RT73CPS software, in digital use:

This is one digital channel:
UHF,1,Z2-CH1,438800000,438800000,TS2,TS2,1,1,DIGITAL,LOW,12.5KHz,OFF,LOCAL,ALL,Zone2,OFF,OFF,PATCS,UNCONFIRMED,IMPOLITE,OFF,OFF,0,OFF,0,0

But, if I'm query write one analog chanel, Is this?
VHF,1,V48Estrela,145600000,145000000,0,0,0,0,ANALOG,LOW,12.5KHz,OFF,LOCAL,ALL,Zone1,OFF,OFF,PATCS,UNCONFIRMED,IMPOLITE,OFF,OFF,114,OFF,0,0

- Who write TX Tone Type and Tx tone number? Becausa for 114,8Hz tone, isn't possible to use this number

[MM7DBT]

When setting analog channel just make timeslot TS1 and CC 1 and other digital settings, contact etc, to the default. They don't matter with analog channel.
CTCSS and DCS tones are set like below. Note the period (.) and not a comma (,) in the number.


CTCSS - 114.8Hz

Code: Select all

Zone4,1,CTCSS,430875000,438475000,TS1,TS1,1,1,ANALOG,LOW,12.5KHz,OFF,OFF,OFF,OFF,OFF,OFF,PATCS,UNCONFIRMED,IMPOLITE,OFF,CTCSS,114.8,CTCSS,114.8,0

DCS - D017N

Code: Select all

Zone4,2,DCS017,430950000,438550000,TS1,TS1,1,1,ANALOG,LOW,12.5KHz,OFF,OFF,OFF,OFF,OFF,OFF,PATCS,UNCONFIRMED,IMPOLITE,OFF,DCS,17,DCS,17,0