Offset and Length were out of bounds for the array

[bwQuestion]

Files attached.

I m getting this same error when performing many task. This most recent is when sending a codeplug to the radio.

I created the plug. Saved the json. Tried to write to the radio. This error. Closed the program, reopen, power off/ back on radio, unplug reconnect USB. Can do a read from radio and then write back what it read in without issue.

Any pointers to get me back in the right direction would be grateful.

Bryant

[bwQuestion]

Follow up: Changed the RecvGroup to have 1 contact each and the error changed to being too many for the array. That may be expected if the number of receive groups is limited. I will see if I can add another screenshot to the post.

[bwQuestion]

Second Follow Up: Based on what another user was reporting with the number of contacts, I shortened my list of contacts to 90 and channels to under 90 and it wrote successfully to the radio. It appears we have exceeded the capacity of the defined array/s

[bwQuestion]

Ok. Some more follow up. I downloaded the contact and channel files from the Australian group that were kind enough to post on here. Their files had fewer contacts but many more channels than mine. I was able to load both into the software and transfer the code plug to the radio with no issues. I was then able to copy my contacts and channels into their files and load them and it worked. Then as I attempted to delete the ones I did not want, it started to fail again. This is very weird. I can only assume that I have looked at the files too much and am missing something obvious.

I am attaching both files here. I would be very appreciative if someone could tell me what is happening here with these.

[bwQuestion]

Different arrangement. Same error. Makes no sense as to how a much larger file can work but this on doesn't.

[bwQuestion]

Second Follow Up: Based on what another user was reporting with the number of contacts, I shortened my list of contacts to 90 and channels to under 90 and it wrote successfully to the radio. It appears we have exceeded the capacity of the defined array/s

Ignore that post. After further testing the number of contacts does not seem to have anything to do with the problem.