radio read error 26028 bytearray index out of range

[AvonDon]

Reads all items 1 through 57 before terminating with this error message

read failed.jpg

[AvonDon]

This is with a new Radioddity DB25-D, original firmware. Error number is different each time but otherwise error message is the same, "Failed to execute script 'cperadiotools' due to unhandled exception"

[MM7DBT]

Which firmware are you using, you can check on the radio by going into the Menu > Device Info > Version
Also which version of the editor are you using?
There was an issue with the previous version 0.2.0811.1

I have just recently updated to 0.2.0822.1 which should have fixed this issue.
Tested with Radioddity firmware "Dec 11 2021" and newer 2022 firmwares from Radioddity and Kydera.

If you are using the latest editor version 0.2.0822.1 and still receive the same error message, it would be helpful to diagnose the error if you could send me the binary codeplug download from the radio, this should not fail as the editor does not try to open the codeplug but instead saves the raw data to .bin file.

You can do this by right-clicking on the "Download From Radio" button in the editor, you will then be prompted to enter a name and location for the .bin file.

dlbin.PNG

You can then either upload this file to this thread or you can private message me on here, if you would rather keep your codeplug private

Cheers,
David

[AvonDon]

DB25-D firmware screenshot.jpg

Fixed!!! Wow that was fast. Before seeing your response I tried one more time and was prompted to update to your latest version, and - voila!

My firmware is DB25-D version 909E.D66.EARSAB.014
dated April 4 2022